Category Archives: Garden

Somerby Planter with Trellis 135cmx100cmx40cm

A Somerby Planter standing at 1m wide by 0.4m deep and 1.35m high, with a trellis backing attachment. This product comes prebuilt, however the trellis backing does need attaching to the planter. Pressure treated green timber Planed finish Comes pre built (trellis requires attachment)

Hayes H302 Permanent Wire Strainer per piece

Hayes H302 Permanent Wire Strainer per piece

Loddington Raised Bed 1800mm x 1000mm x 250mm

A raised bed standing at 1m wide by 1.8m deep and 0.25m high. This product comes flat packed and does require building, it comes with instructions and fixings. Pressure treated green timber Planed finish Comes flat packed (includes fixings*)   *We advise two people to assemble

Hayes H303 Ratchet Tightening Handle

Hayes H303 handle for tightening ratchets

Lift ‘n’ Slide Throwover Loop

Throw over lift ‘n’ slide for metal gates. Drop Over

6′ Sheep Hurdle

Galvanised 6′ (1.83m) long and just over 3′ (0.97m) high. Intended to form large holding pens or small individual pens.

180cm x 90cm Square Horizontal Gate

180cm x 90cm Square Horizontal Gate

Wellow Gate T&G Dome Top 1.8m x 0.9m (framed)

Quality framed, ledged and braced morticed side gate. Made from tongue and groove matched boarding. Produced from pressure treated softwood.

2′ Ground Socket (Including Lid)

600mm galvanised ground socket including lid. To suit 114.3mm diameter posts. Allows for the removal of the post for better access.

Heavy Duty Drop over Frame for Galv Gates

860mm long lockable throwover loop. Lockable pin sold seperately.

Padlockable pin for HD drop-over frame

Padlockable pin for HD drop-over frame

Lightweight Drop Over Frame for Galv Gates

Simple throwover loop for metal gates.  

Galv Clap Post Double Slotted (Suits N7 Gate)

Dual slotted slam post, slots @ 180 degree. 2000mm long x 114.3mm diameter.

6′ x 3′ Orchard Gate Curved Top

An elegant curved top slatted gate. Made from kiln dried pressure treated softwood. 1.8 metres high to the top of the bow.

Galv Auto Latch Clap Post (Suits N7 Gate)

D-Latch post 2000mm long x 114.3mm diameter. To suit National 7, Ashbourne, Imperial 6 and half mesh gates with spring loaded sliding bolt.

Somerby Small Rectangular Planter 600mm x 300mm x 250mm

Somerby Small Rectangular Planter 600mm Long x 300mm Wide x 250mm High. Pressure-treated timber

Drop Bolt for Galv Gates (Bolt On)

560mm Bolt on Drop Bolt for Galvanised Gates.  

Somerby Medium Planter 700mm x 400mm x 300mm

Somerby Medium Planter 700mm Long x 400mm Wide x 300mm High. Pressure-treated timber

Drop Bolt for Galv Gates (Clamp On)

Clamp on Drop Bolt for Galvanised Gates. To suit 50mm x 25mm stiles.

Somerby Large Planter 800mm x 500mm x 330mm

Somerby Large Planter 800mm Long x 500mm Wide x 330mm High. Pressure-treated timber